Difference between revisions of "Geeklog Release Procedures"

From GeeklogWiki
Jump to: navigation, search
(Updating geeklog.net)
(GLnet_curve Theme)
Line 37: Line 37:
 
The following files need special handling when updating geeklog.net:
 
The following files need special handling when updating geeklog.net:
  
== GLnet_curve Theme ==
+
== glnet_curve Theme ==
 
* As of Geeklog 2.1.2 the glnet_curve is now the default theme used by Geeklog.net. It is a copy of on the Denim Curve theme with only a few changes to the header and footer template files (along with the name changes, etc.. required in functions.php). This theme is based on the Denim theme which is also required in the themes directory. On upgrades for the glnet_curve remember to update the jquery_ui directory and the images directory with any changes from the Denim Curve theme. As far as template files are concerned only the files we modified directly for Geeklog.net should be in the glnet_curve directory and the Denim theme should be the stock theme from the release.
 
* As of Geeklog 2.1.2 the glnet_curve is now the default theme used by Geeklog.net. It is a copy of on the Denim Curve theme with only a few changes to the header and footer template files (along with the name changes, etc.. required in functions.php). This theme is based on the Denim theme which is also required in the themes directory. On upgrades for the glnet_curve remember to update the jquery_ui directory and the images directory with any changes from the Denim Curve theme. As far as template files are concerned only the files we modified directly for Geeklog.net should be in the glnet_curve directory and the Denim theme should be the stock theme from the release.
 
* For glnet_curve theme take a copy of the <tt>footer.thtml</tt> from denim and add it to glnet_curve. Make sure the version number is visible and add the "hosted by pair.com" link (as per our agreement with pair Networks).
 
* For glnet_curve theme take a copy of the <tt>footer.thtml</tt> from denim and add it to glnet_curve. Make sure the version number is visible and add the "hosted by pair.com" link (as per our agreement with pair Networks).

Revision as of 15:16, 22 June 2017

This page outlines the necessary steps to perform before, during, and after the release of a new Geeklog version.

Pre-Announcements

  • Obviously, plans for a new release should have been discussed on geeklog-devel. For security releases, the discussion may happen on geeklog-security only.
  • Notify the geeklog-translations mailing list to give translators a chance and a timeframe to update their translations.


The Tarball

  • Make sure you update history file in docs with version and release date (and readme in root directory if needed)
  • Confirm correct Geeklog version number in /public_html/sitconfig.php, /public_html/admin/install/classes/installer.class.php, and /build.xml
  • Make sure all language files are synched
    • This process will use the English language files and synch with all other languages for Geeklog, The Installer, and all core plugins
    • Open your command prompt and to the top directory of your local Geeklog repository
    • Type: .\system\build\vendor\phing\phing\bin\phing.bat lang
    • Once complete commit any updated language files
  • For building an install package we use phing (which uses a config file called “build.xml” in the top directory).
    • Go to your Geeklog repository top directory in command prompt
    • Confirm latest repository and make sure no old compressed install packages exist (or they will be rolled into the new package).
    • Type: .\system\build\vendor\phing\phing\bin\phing.bat dist
    • Once the process complete you will get a file “geeklog-2.1.2.tar.gz” in the top directory
    • If this is a beta or release candidate then the file will need to be renamed to: geeklog-2.1.2-b1.tar.gz or: geeklog-2.1.2-rc1.tar.gz
  • Create a new release on GitHub
    • Visit https://github.com/Geeklog-Core/geeklog/releases
    • Create a release and make sure to tag it the correct version number (it will be tagged in the repository), for example: v2.1.2 or v2.1.2-rc1 (for release candidate) or v2.1.2-b1 (for beta)
  • Visit Geeklog.net
    • Add the new release to the downloads plugin
    • Add a new article about the release pointing to the correct download
  • unpack tarball on the server
  • update site

Updating geeklog.net

  • TBD: document traps and pitfalls

The following files need special handling when updating geeklog.net:

glnet_curve Theme

  • As of Geeklog 2.1.2 the glnet_curve is now the default theme used by Geeklog.net. It is a copy of on the Denim Curve theme with only a few changes to the header and footer template files (along with the name changes, etc.. required in functions.php). This theme is based on the Denim theme which is also required in the themes directory. On upgrades for the glnet_curve remember to update the jquery_ui directory and the images directory with any changes from the Denim Curve theme. As far as template files are concerned only the files we modified directly for Geeklog.net should be in the glnet_curve directory and the Denim theme should be the stock theme from the release.
  • For glnet_curve theme take a copy of the footer.thtml from denim and add it to glnet_curve. Make sure the version number is visible and add the "hosted by pair.com" link (as per our agreement with pair Networks).
  • The Download block on the top right uses a block header template without a title, so add this to the theme's functions.php:
    $_BLOCK_TEMPLATE['download'] = 'blockheader-notitle-right.thtml,blockfooter.thtml';
    and make sure the blockheader-notitle-right.thtml template file exists.

Other Files

  • remove the bundled lib-custom.php and robots.txt and use the copies already present on the webserver instead
  • check db-config.php and siteconfig.php for any required changes
  • lib-common.php: add the require_once line for the Bad Behavior plugin


Hacks

The following "Cool Hacks" are installed on geeklog.net:

  • input type="search". The modern curve search box is located in leftblocks.thtml template file.

Information to Update

Geeklog Sites

  • Make sure you update history file in docs with version and release date (and readme in root directory if needed) before tarball creation
  • After approving the tarball from the File Management submission queue (the file can take up to 15 minutes to appear after adding the tag to the repository), go to the list of current versions. Edit all non-current versions and change their category from "Geeklog" to "Geeklog > old versions".
  • Publish an article on geeklog.net:
    • summarize the changes in this release
    • include a link to the entry in the download area
    • Convention for the story ID: geeklog-x.y.z, e.g. geeklog-1.5.2, geeklog-1.4.0sr6
    • Add story to the Geeklog topic and the Announcements topic (default). Make sure both are set to inherit
    • Announcements of new versions go into the Announcements topic. For security releases, either post the announcement in the Security topic, or post two articles (one in Announcements and the details of the security issues in Security).
    • don't forget to send pingbacks and ping weblog directories
  • Update the versionchecker.php script (not for betas/release candidates).
    • Once updated, the new version of the script should be added to the tools repository.
  • Send out an email to the geeklog-announce mailing list.
    • Provide a brief description of the release and link to the geeklog.net article for details.
  • Update the wiki frontpage (not for betas/release candidates)
  • Update the GitHub Issue Tracker (not for betas/release candidates). Make sure you have a later milestone create and then move all incomplete issues and feature requests from current milestone to a later milestone. Close current milestone
  • Notify Ironmax at Spacequad.com that the demo site needs to be updated to use the latest version of Geeklog (not for betas/release candidates). Once updated you will also need to update the Resources block with the correct version number of the demo site.

External Sites

These sites should only be notified about final and security releases (i.e. not for betas and release candidates):